Numerical analysis of the effect of natural microcracks on the supercritical CO2 fracturing crack network of shale rock based on bonded particle models          下载免费PDF全文

Peihuo Peng  Yang Ju  Yongliang Wang  Shaoqin Wang  Feng Gao 《国际地质力学数值与分析法杂志》2017,41(18):1992-2013

The problem of predicting the geometric structure of induced fractures is highly complex and significant in the fracturing stimulation of rock reservoirs. In the traditional continuous fracturing models, the mechanical properties of reservoir rock are input as macroscopic quantities. These models neglect the microcracks and discontinuous characteristics of rock, which are important factors influencing the geometric structure of the induced fractures. In this paper, we simulate supercritical CO₂ fracturing based on the bonded particle model to investigate the effect of original natural microcracks on the induced‐fracture network distribution. The microcracks are simulated explicitly as broken bonds that form and coalesce into macroscopic fractures in the supercritical CO₂ fracturing process. A calculation method for the distribution uniformity index (DUI) is proposed. The influence of the total number and DUI of initial microcracks on the mechanical properties of the rock sample is studied. The DUI of the induced fractures of supercritical CO₂ fracturing and hydraulic fracturing for different DUIs of initial microcracks are compared, holding other conditions constant. The sensitivity of the DUI of the induced fractures to that of initial natural microcracks under different horizontal stress ratios is also probed. The numerical results indicate that the distribution of induced fractures of supercritical CO₂ fracturing is more uniform than that of common hydraulic fracturing when the horizontal stress ratio is small.  相似文献   

Analysis of the contributions of topographic,soil, and vegetation features on the spatial distributions of surface soil moisture in a steep natural forested headwater catchment          下载免费PDF全文

Wei‐Li Liang  Sheng‐Lun Li  Feng‐Xu Hung 《水文研究》2017,31(22):3796-3809

Surface soil moisture has been extensively studied for various land uses and landforms. Although many studies have reported potential factors that control surface soil moisture over space or time, the findings have not always been consistent, indicating a need for identification of the main factors. This study focused on the static controls of topographic, soil, and vegetation features on surface soil moisture in a steep natural forested headwater catchment consisting of three hillslope units of a gully area, side slope, and valley‐head slope. Using a simple correlation analysis to investigate the effects of the static factors on surface soil moisture at depths of 0–20 cm at 470 points in 13 surveys, we addressed the characteristics of surface soil moisture and its main controlling factors. The results indicated that the mean of surface soil moisture was in the decreasing order of gully area > valley‐head slope > side slope. The relationship between the mean and standard deviation of surface soil moisture showed a convex‐upward shape in the headwater catchment, a negative curvilinear shape in the gully area, and positive curvilinear shapes at the side and valley‐head slopes. At the headwater catchment and valley‐head slope, positive contributions of soil porosity and negative contributions of slope gradient and saturated hydraulic conductivity were the main controlling factors of surface soil moisture under wetter conditions, whereas positive contributions of topographic wetness index and negative contributions of vegetation density were the main controlling factors of surface soil moisture under drier conditions. At the side slope underlain by fractured bedrocks, only saturated hydraulic conductivity and vegetation density were observed to be the controlling factors. Surface soil moisture in the gully area was mainly affected by runoff rather than were static features. Thus, using hillslope units is effective for approximately estimating the hydrological behaviours of surface moisture on a larger scale, whereas dependency between the main static factors and moisture conditions is helpful for estimating the spatial distributions of surface moisture on a smaller scale.  相似文献   

A modelling framework for evaluation of the hydrological impacts of nature‐based approaches to flood risk management,with application to in‐channel interventions across a 29‐km2 scale catchment in the United Kingdom          下载免费PDF全文

Peter Metcalfe  Keith Beven  Barry Hankin  Rob Lamb 《水文研究》2017,31(9):1734-1748

Nature‐based approaches to flood risk management are increasing in popularity. Evidence for the effectiveness at the catchment scale of such spatially distributed upstream measures is inconclusive. However, it also remains an open question whether, under certain conditions, the individual impacts of a collection of flood mitigation interventions could combine to produce a detrimental effect on runoff response. A modelling framework is presented for evaluation of the impacts of hillslope and in‐channel natural flood management interventions. It couples an existing semidistributed hydrological model with a new, spatially explicit, hydraulic channel network routing model. The model is applied to assess a potential flood mitigation scheme in an agricultural catchment in North Yorkshire, United Kingdom, comprising various configurations of a single variety of in‐channel feature. The hydrological model is used to generate subsurface and surface fluxes for a flood event in 2012. The network routing model is then applied to evaluate the response to the addition of up to 59 features. Additional channel and floodplain storage of approximately 70,000 m³ is seen with a reduction of around 11% in peak discharge. Although this might be sufficient to reduce flooding in moderate events, it is inadequate to prevent flooding in the double‐peaked storm of the magnitude that caused damage within the catchment in 2012. Some strategies using features specific to this catchment are suggested in order to improve the attenuation that could be achieved by applying a nature‐based approach.  相似文献   

Material selection for the gas containment system of a compressed natural gas carrier fleet     

《Applied Ocean Research》2016

In this work, the possible exploitation of fiber-reinforced composites in the context of maritime transportation of compressed natural gas (CNG) is investigated. In addition to a more conventional steel configuration, two different fiber materials, carbon and glass, are considered as construction materials for pressure vessels (PVs) to be stored on board ships, with thickness optimized by FEM analysis.The considered scenario is represented by the transportation of CNG from an offshore well to a terminal on shore. Fleets of ships carrying CNG in pressure vessels manufactured with the investigated materials are generated by means of a ship synthesis model (SSM) software and compared on the basis of technical and economical indicators.The choice of the construction material influences considerably the weight of the PVs, which represent a major item of total ship weight and reflects directly on the general transport performances in terms of resistance, seakeeping and reliability in the service. On the other hand, capital as well as operating expenditures are considerably affected by the choice. When exploring the design space, the ship synthesis model is able, at a preliminary stage of the design, to account for the various technical and economical aspects, their implications and relationships. Results are presented of computations carried out in a specific case, identified by the annual gas production and other characteristics of the well terminal and a cruising route for the ships. The comparison is carried out on the basis of the cost per transported unit of gas and of the percentage of success in the transportation process. The computations show that the choice of the PV material has a key influence on the results in terms of optimal number, dimensions and speed of the ships.  相似文献   

Simulation of site-scale water fluxes in desert and natural oasis ecosystems of the arid region in Northwest China     

Mingjuan Xie  Geping Luo  Olaf Hellwich  Amaury Frankl  Wenqiang Zhang  Chunbo Chen  Chen Zhang  Philippe De Maeyer 《水文研究》2021,35(12):e14444

The study of water fluxes is important to better understand hydrological cycles in arid regions. Data-driven machine learning models have been recently applied to water flux simulation. Previous studies have built site-scale simulation models of water fluxes for individual sites separately, requiring a large amount of data from each site and significant computation time. For arid areas, there is no consensus as to the optimal model and variable selection method to simulate water fluxes. Using data from seven flux observation sites in the arid region of Northwest China, this study compared the performance of random forest (RF), support vector machine (SVM), back propagation neural network (BPNN), and multiple linear regression (MLR) models in simulating water fluxes. Additionally, the study investigated inter-annual and seasonal variation in water fluxes and the dominant drivers of this variation at different sites. A universal simulation model for water flux was built using the RF approach and key variables as determined by MLR, incorporating data from all sites. Model performance of the SVM algorithm (R² = 0.25–0.90) was slightly worse than that of the RF algorithm (R² = 0.41–0.91); the BPNN algorithm performed poorly in most cases (R² = 0.15–0.88). Similarly, the MLR results were limited and unreliable (R² = 0.00–0.66). Using the universal RF model, annual water fluxes were found to be much higher than the precipitation received at each site, and natural oases showed higher fluxes than desert ecosystems. Water fluxes were highest during the growing season (May–September) and lowest during the non-growing season (October–April). Furthermore, the dominant drivers of water flux variation were various among different sites, but the normalized difference vegetation index (NDVI), soil moisture and soil temperature were important at most sites. This study provides useful insights for simulating water fluxes in desert and oasis ecosystems, understanding patterns of variation and the underlying mechanisms. Besides, these results can make a contribution as the decision-making basis to the water management in desert and oasis ecosystems.  相似文献   

Application of a Bayesian model to infer the contribution of coalbed natural gas produced water to the Powder River,Wyoming and Montana          下载免费PDF全文

Jason M. Mailloux  Kiona Ogle  Carol D. Frost 《水文研究》2014,28(4):2361-2381

The Powder River Basin (PRB) of Wyoming and Montana contains significant coal and coal bed natural gas (CBNG) resources. CBNG extraction requires the production of large volumes of water, much of which is discharged into existing drainages. Compared to surface waters, the CBNG produced water is high in sodium relative to calcium and magnesium, elevating the sodium adsorption ratio (SAR). To mitigate the possible impact this produced water may have on the quality of surface water used for irrigation, the State of Montana passed water anti‐degradation legislation, which could affect CBNG production in Wyoming. In this study, we sought to determine the proportion of CBNG produced water discharged to tributaries that reaches the Powder River by implementing a four end‐member mixing model within a Bayesian statistical framework. The model accounts for the ⁸⁷Sr/⁸⁶Sr, δ¹³C_DIC, [Sr] and [DIC] of CBNG produced water and surface water interacting with the three primary lithologies exposed in the PRB. The model estimates the relative contribution of the end members to the river water, while incorporating uncertainty associated with measurement and process error. Model results confirm that both of the tributaries associated with high CBNG activity are mostly composed of CBNG produced water (70–100%). The model indicates that up to 50% of the Powder River is composed of CBNG produced water downstream from the CBNG tributaries, decreasing with distance by dilution from non‐CBNG impacted tributaries from the point sources to ~10–20% at the Montana border. This amount of CBNG produced water does not significantly affect the SAR or electrical conductivity of the Powder River in Montana. Copyright © 2013 John Wiley & Sons, Ltd.  相似文献   

基于小波包分解的结构自振特征提取及多路径误差分离     

吴继忠  花向红  高俊强 《武汉大学学报(信息科学版)》2010,(4)

为了准确获取结构自振特性,通过分析多路径误差和结构振动的频率特征,采用小波包分解和频谱分析相结合的方法,在不同尺度下进行特定成分的提取,再作频率特性分析。实验结果表明,小波包能够有效地分离多路径误差,实现结构振动特征的提取,GPS测定的结构自振频率与理论值吻合较好,并且具有很好的稳定性。  相似文献   

Modeling three‐dimensional hydraulic fracture propagation using virtual multidimensional internal bonds     

K. Huang  Z. Zhang  Ahmad Ghassemi 《国际地质力学数值与分析法杂志》2013,37(13):2021-2038

Propagation of fractures, especially those emanating from wellbores and closed natural fractures, often involves Mode I and Mode II, and at times Mode III, posing significant challenges to its numerical simulation. When an embedded inclined fracture is subjected to compression, the fracture edge is constrained by the surrounding materials so that its true propagation pattern cannot be simulated by 2D models. In this article, a virtual multidimensional internal bond (VMIB) model is presented to simulate three‐dimensional (3D) fracture propagation. The VMIB model bridges the processes of macro fracture and micro bond rupture. The macro 3D constitutive relation in VMIB is derived from the 1D bond in the micro scale and is implemented in a 3D finite element method. To represent the contact and friction between fracture surfaces, a 3D element partition method is employed. The model is applied to simulate fracture propagation and coalescence in typical laboratory experiments and is used to analyze the propagation of an embedded fracture. Simulation results for single and multiple fractures illustrate 3D features of the tensile and compressive fracture propagation, especially the propagation of a Mode III fracture. The results match well with the experimental observation, suggesting that the presented method can capture the main features of 3D fracture propagation and coalescence. Moreover, by developing an algorithm for applying pressure on the fracture surfaces, propagation of a natural fracture is also simulated. The result illustrates an interesting and important phenomenon of Mode III fracture propagation, namely the fracture front segmentation. Copyright © 2012 John Wiley & Sons, Ltd.  相似文献   

A 200-year precipitation index for the central English Lake District / Un indice de précipitation de 200 ans pour la Région des Lacs en Angleterre     

《水文科学杂志》2013,58(5)

Abstract

Abstract The geographical context and hydroclimatology of the English Lake District means that the region is an important monitor of changes to nationally significant environmental assets. Using monthly rainfall series for sites in and around the central Lake District, a continuous ~200-year precipitation index was constructed for a representative station close to Grasmere. The bridged series shows a significant decline in summer rainfall since the 1960s, offset by increases in winter and spring that are strongly linked to North Atlantic forcing. Over longer time periods, the index exhibits several notable dry (1850s, 1880s, 1890s, 1930s, 1970s) and wet (1820s, 1870s, 1920s, 1940s, 1990s) decades. These patterns are strongly reflected by reservoir inflow series and by indicators of the biological status of the region’s freshwater lakes. It is argued that long-term climate indices will become increasingly important as managers seek to evaluate recent and project environmental changes within the context of long-term natural variability.  相似文献   

丽水山地夏季避暑旅游气候适宜度评价     

吴昊旻  姜燕敏  司波  白云霞 《气象与环境学报》2021,37(6):106-112

利用2015—2019年丽水市283个气象观测站的逐日和逐时资料,采用中国气象局“避暑旅游气候适宜度评价方法”行业标准,在研究避暑旅游气候适宜度时空分布的基础上,运用GIS平台建立不同地形条件下避暑旅游适宜度地理推算模型,对丽水避暑旅游气候适宜度进行区划。结果表明,丽水山地夏季避暑旅游气候适宜等级为很适宜,所占区域居绝对比重。6月丽水各站避暑适宜度为很适宜,以海拔800 m为界,随着海拔高度的升高,适宜度先增后减。7—8月避暑旅游气候适宜度随海拔高度增加而提升,300 m以上为较适宜及以上级别。地理推算模型表明,丽水避暑旅游气候适宜度与海拔高度密切相关,庆元适宜及以上等级区域面积占比为全市最高,避暑旅游气候条件最优,其次景宁、遂昌、龙泉避暑旅游气候适宜度也较优越。  相似文献